I Need Help Finding a Handleset That Will Fit My Door…

Is there a way to search for a new handleset with my measurements?

YOU BET!

We have this handy new page added to our site to do just that!

Make sure and make your measurements before and read through the important paragraphs to better help you.

All of the Handlesets are grouped by manufacture and listed in order by measurements. Be sure to let us know if you have any questions, we would be glad to take the order over the phone.

 

What if I have existing holes in my door, but want a new handleset?

No problem! That’s what all the measurements were taken for! We made this easy to read grid to help you find exactly what Handlesets will fit your existing holes.

One of the most important measurements, is the “C” measurement shown here.

Your handleset will have a through bolt attaching the bottom of the exterior grip. It’s important to match this length with your new handleset to avoid drilling a new hole in the door and unsightly patching.

There is about 1-1/2″ of adjustment on the “C” measurement for these handlesets; 3/4″ shorter or longer than the length shown.

The standard door prep for an entrance doors is two 2-1/8″ bore holes that are 5-1/2″ center to center (measurement “B” in the image to the right) If you have more or even a little smaller than 5-1/2 inches, you can still use a sectional handleset, which have a seperate deadbolt.

 

This is made to make it an easier search for the perfect hardware for your door.

We are watching out for you.

Give us a call if you need any help!